Description
Moving your Solo2 DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo DL into an older vehicle and need a power supply cable, use this and use only the + and – wires and fold back the can inputs.
The AiM V02569050 harness connects your Solo 2 DL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo 2 DL, and the other has 6 non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground).
Does not fit original AiM Solo DL.
AiM Solo2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Details:
- Manufacturer: AiM
- Manufacturer part number: V02589050
- Fits Solo DL: No
- Fits Solo 2 DL: Yes
- Fits Solo Base Model: No
- Fits Solo 2 Base Model: No
- Pins on AiM Solo DL Side: 7 Pin Thread on connector
- Vehicle Chassis Ends: 6 Non terminated wires
- Vehicle Chassis Ends Break Out: Red=12VDC, Black=Ground, Blue=ECU RS232TX, Blue=ECU RS232 CAN-, Gray ECU RS232 RX, Gray CAN+
AiM Solo 2 DL CAN/RS232 Wiring Harness (New Solo 2 DL) Wiring Codes:
- Red: 9-15VDC
- Black: Ground
- Grey: CAN+
- Blue: CAN-
- Black: ECU RS232 RX
- Blue: ECU RS232TX
Both blue wires are the same color, but each wire has an identifier tag stating the connection type
Reviews
There are no reviews yet.